닫기

Company

Machinery part

Mold part

Materials and processing

Service center

Home Machinery part RUBBER COMPRESSION MOLDING M/C for OIL SEAL

RUBBER COMPRESSION MOLDING M/C for OIL SEAL

  • This machine is properly designed for the production of oil seal. After dividing the upper-table by upper-ejector, it can divide by pushing the mold core and close/open by pushing & rotation. Core-separation system on the upper table is suitable for precise oil-seal production.
  • Be capable of reducing setting times of operating conditions of same items by storaging operating conditions (20set) by touch screen monitor and prompt remedy to the breakdowns and operation is possible by preserving messages(195items) for the operations and defects.
  • Efficient production management is possible by computer communication because of the receiving data at the computer room with real time (option)

SPECIFICATION

Item SC-V1130OS SC-V1540OS SC-V1545OS SC-V2050OS SC-V2550OS SC-V3060OS SC-V4070OS
Clamping force ton 110 150 150 200 250 300 400
Heating plate size mm 300×360 400×460 450×450 500×500 500×560 600×600 700×700
Daylight mm 300 300 300 330 330 330 330
Mold thickness mm 20~150 20~180 20~180 20~200 20~200 20~300 20~300
Max.pressure kgf/㎠ 210
Operating pressure kgf/㎠ 200 200 200 190 190 190 190
Low-pressured pump cap ℓ/min 26 26 26 26 26 26 26
High-pressured pump cap ℓ/min 12 12 12 19 19 23 25
Motor capacity< HP×P 10×6 10×6 10×6 10×6 10×6 15×6 15×6
Heater capacity kw 3.9 6.6 7.2 7.8 10.8 13.8 19
Press-uni unit 3.1×1, 4×1 2×1, 3×1, 4×1 2×1, 3×1 2×1, 3×1 2×1, 3×1 2×1, 3×1 1×1, 2×1

※ Can be changeable without any notice.

* Move left and right